Making Copies; Copy Settings; Stop Copying; Changing Copy Speed And Quality - Brother MFC-J625DW Advanced User's Manual

7

Making copies

Copy settings

You can change the copy settings temporarily
for multiple copies.
(MFC models only) The machine returns to its
default settings after being idle for 1 minute,
or if the Mode Timer returns the machine to
Fax mode. (See Mode Timer (MFC models
only) uu page 4.)
To change a setting, press COPY or Copy,
Options and then press s or t to scroll
through the copy settings. When the setting
you want is displayed, press it and choose
your option.
When you are finished choosing settings,
press Mono Start or Colour Start.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will remain until
you change them again. (See Setting your
changes as a new default uu page 39.)

Stop copying

To stop copying, press Stop/Exit.
Changing copy speed and
7
quality
You can choose from a range of speed and
quality. The factory setting is Normal.

Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.

Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Press
b
Load your document.
c
Enter the number of copies you want.
7
d
Press Options.
e
Press s or t to display Quality.
f
Press Quality.
g
Press s or t to display Fast, Normal
or Best, and then press the option you
want to set.
h
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY) or Copy.
7
7
7
33