Note On Model Differences; Choosing A Good Location - Primera Bravo 4102 XRP User Manual

TOC
A. NOTE ON MODEL DIFFERENCES
The Bravo 4100 XRP Series comes in two different models
including:
Bravo 4102 XRP (2 DVD Drives) Burns and Prints CD,
•
DVDs and DVD-DL
• Bravo 4102 XRPBlu (2 BDR Drives) Burns and Prints CD,
DVD, DVD-DL, BDR and BDR-DL
These instructions are written to apply to all models. For
example there are no special instructions for burning
Discs
TM
recognizes that you have Blu-ray capable drives and adds
the BDR media type
Important Note: The Bravo 4102 XRP Blu requires the Disc Publisher to
be connected to the computer USB for printing AND eSata for the
drives. Both eSATA and USB are required! The eSATA PCI
express card included with the unit may need to be installed if you do
not already have eSATA ports on your computer. Refer to the
instructions included with the card for more details.
B. CHOOSING A GOOD LOCATION
• Place the Publisher in a location with adequate air
circulation to prevent internal heat build up. If the XRP
will be placed in a rack it will fit into a 7U space. The XRP
is 10.75" (273.5 mm) tall which is .25" larger than 6U. In a
7U space there will be 1.5" (38.1 mm) of space above the
unit. If the XRP will be rack mounted a rack mount shelf
will be necessary (Part 63528).
Do not place the Publisher near heat sources such as
•
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
2 Getting Started
if you have a Blu-ray model. The software simply
to the list of available media to burn.
INDEX
Blu-ray