Using The Pedals - Korg Concert C-340 User Manual

Hold down the REVERB or CHORUS button, and press either the PIANO 1/L,
1
PIANO 2/M, or E.PIANO1/H sound selection button to select the reverb or chorus
depth.
Button
PIANO 1/L
PIANO 2/M
E.PIANO 1/H
To check the currently selected reverb or chorus depth, hold down the REVERB or
2
CHORUS button, and look at which of the indicators is turned on.
To turn the reverb or chorus off, press the REVERB or CHORUS button. The indi-
3
cator on the button will turn off.

Using the pedals

The C-340 has three pedals: soft, sostenuto, and damper. You can use these pedals to
add expression to your playing, as on a traditional piano.
Pressing this pedal will make the tone softer. You can control the soft-
Soft pedal.
ness of the tone by how far down you press the on pedal ("half-pedaling").
Sostenuto pedal.
notes that are already being held down on the keyboard, and will sustain only those
notes. The damper effect will not be applied to any additional notes that you play
while holding down the Sostenuto pedal.
Damper pedal.
nant decay. You can control the damper depth by how far down you press the on
pedal ("half-pedaling").
Basic functions
Reverb depth
Light reverb
Normal reverb
Deep reverb
Soft pedal
Sostenuto pedal
Pressing this pedal will apply the damper effect only to the
Pressing this pedal will sustain the sound, producing a richly reso-
Chorus depth
Light chorus
Normal chorus
Deep chorus
Damper pedal
19