X91; Recording A Second Part - Kawai EP3 Owner's Manual

… Step 3
Play the piano.
Any changes made to the sound while recording will also be recorded.
… Step 4
Press the PLAY/STOP button to stop recording.
The LED indicators for the PLAY/STOP and REC buttons will fl ash briefl y as the newly recorded part is saved to
memory.
„ Saving may take a few moments. During this time, the EP3 digital piano will not respond to any other operations.
„ To record the part again, simply repeat the above procedure. The new recording will completely erase the previous
recording.

‘ RECORDING A SECOND PART

A second part can be recorded in PART2 of the same song.
… Step 1
Press and hold the REC button, then press the BASS button to select PART2 for recording.
The LED indicators for the PIANO and BASS buttons will start to fl ash, indicating that SONG1 and PART2 are
selected for recording. The LED indicator for the CLAVI/GUITAR button will now be turned on, indicating that
PART1 has already been recorded.
The recorder will automatically start recording with the fi rst note played.
The LED indicators for the PLAY/STOP and REC buttons will turn on.
The recording can also be started by pressing the PLAY/STOP button
instead of pressing a key, allowing a blank bar or 'up beat' to be
inserted at the beginning of a song.
2
Select PART2
Press and hold the button
1
Page
31
3