Kawai EP3 Owner's Manual page 51

When transmit program change is set to 'Off', program change and other panel information will NOT be
transmitted via MIDI.
When transmit program change is set to 'On', the following MIDI exclusive data will be transmitted:
• Reverb settings (On/Off, type)
• Tuning setting
• Transmit program change number On/Off
• Touch curve setting
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the EFFECTS button.
2
1
Press the EFFECTS button Press and hold both buttons
The name of the function 'PGM' (Program) and the current settings will be shown in the LED display.
… Step 2
Press the T or S VALUE/BALANCE buttons to select the desired Transmit Program Change setting.
When transmit program change is set to 'Off', program change and other panel information will not be
transmitted via MIDI.
When transmit program change is set to 'On', program change and other panel information will be transmitted
via MIDI.
… Step 3
Press the TOUCH or TRANSPOSE button to exit Transmit Program Change On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and EFFECTS buttons will stop fl ashing.
„ When using DUAL or SPLIT mode, On/Off information and sound type settings for each mode are transmitted as
exclusive data, however program numbers will not be transmitted. Program numbers will also be transmitted when
multi-timbral mode is on.
„ Any changes made to the Transmit Program Change On/Off setting will remain until the power is turned off.
„ When the power is turned off, the Transmit Program Change On/Off setting will return to the default value of 'On',
however it is possible to use the Memory Backup function to store the preferred Transmit Program Change On/Off
setting. Please refer to the instructions on page 56 for more information.
• Dual mode settings
• Multi-timbral mode On/Off
• Multi-timbral mode Channel mute
• Key of Temperament setting
The LED indicators for the TOUCH, TRANSPOSE, and EFFECTS buttons will
start to fl ash, indicating that the Transmit Program Change On/Off function has
been selected.
TRANSMIT PROGRAM CHANGE
Off On
Page
51
4