Recording (Rec Button ); Recording A Second Part - Kawai CN390 Owner's Manual

9. R
ECORDER
R (REC B
ECORDING
OPERATION
OPERATION
OPERATION
REFERENCE SECTION
B
UTTON
)
UTTON
The REC button is used for recording.
Press the REC button to enable the CN piano to record. The LED
indicator above the button starts flashing to tell you that the piano
is ready to record.
Begin playing some music on the keyboard. The CN piano
automatically begins recording on the first note you play.
When you are finished recording, press the PLAY/STOP button. The
piano will stop recording and save your song to memory.
Saving to memory may take a few seconds and during this time the piano
will not perform any other operations.
You can start recording by pressing the PLAY/STOP button instead of
pressing a key. In this way, you can insert a blank bar at the beginning of
the song.
RECORDING ANOTHER SONG
The CN390 can record and store up to five songs.
Press the SOUND SELECT button labeled with the desired song
number (1–5) while holding down the REC button. The LED indicator
for the song will also begin flashing. Then start recording by
following the regular recording procedure.

RECORDING A SECOND PART

You can record a second part in the second track (part) of the same song.
Press the SOUND SELECT button labeled with the desired part
number while holding down the REC button. The LED indicator for
the part will begin flashing. Then start recording by following the
regular recording procedure.
47