Damper Hold On/Off - Kawai EP3 Owner's Manual

Page
44

7) DAMPER HOLD ON/OFF

This function determines whether or not pressing the damper pedal will sustain continuous sounds such as
organ or strings after the keys are released.
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the STRINGS/CHOIR button.
2
Press the STRINGS/CHOIR button
The name of the function 'dMP' (Damper Hold) and the current settings will be shown in the LED display.
… Step 2
Press the T or S VALUE/BALANCE buttons to select the desired Damper Hold setting.
When set to 'On', pressing the damper pedal will sustain sounds after the keys are released.
4
When set to 'Off', pressing the damper pedal will not sustain sounds after the keys are released.
… Step 3
Press the TOUCH or TRANSPOSE button to exit Damper Hold On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and STRINGS/CHOIR buttons will stop fl ashing.
„ Any changes made to the Damper Hold On/Off setting will remain until the power is turned off.
„ When the power is turned off, the Damper Hold On/Off setting will return to the default value of 'Off', however it is
The LED indicators for the TOUCH, TRANSPOSE, and STRINGS/CHOIR
buttons will start to fl ash, indicating that the Damper Hold On/Off function has
been selected.
1
Press and hold both buttons
possible to use the Memory Backup function to store the preferred Damper Hold On/Off setting. Please refer to the
instructions on page 56 for more information.
DAMPER HOLD
Off On