Part Names And Functions - Kawai EP3 Owner's Manual

Page
10

3) PART NAMES AND FUNCTIONS

zVOLUME
The VOLUME slider controls the master volume level
of the EP3 digital piano. Move the slider to the right to
increase the volume, and to the left to decrease the
1
volume. This slider also controls the headphone volume
and LINE OUT output level. (page 13)
zPHONES
The PHONES jacks located on the
left and right side of the EP3 digital
piano, are used to connect stereo
headphones to the instrument.
Two pairs of headphones can be
connected and used simultaneously.
zLINE IN STEREO Jack
Used to connect the stereo
output from other electronic
instruments or audio equipment
such as a CD player. (page 57)
zDEMO
The DEMO function introduces a
selection of demonstration songs,
highlighting the various capabilities
of the EP3 digital piano. (page 15)
zSPEAKER ON/OFF Switch
Used to turn the internal speakers on or off. (page 12)
zLINE OUT Jacks
Used to connect the audio signal to an external amplifier,
speakers, or recording devices such as a computer. (page 57)
zSPLIT
The SPLIT function divides the
keyboard into two sections - Upper
and Lower - allowing each section
to be played with a different sound.
(page 19)
zVOICING
The VOICING function allows
the tonal quality of the EP3
digital piano to be adjusted.
(page 27)
zMIDI IN/OUT Connectors
Used to connect the EP3 digital piano to external
MIDI devices such as other electronic instruments or
computers. (page 57)
zUSB Connector
Used to connect the EP3 digital piano with a personal
computer to exchange MIDI data. (page 57)
zDC IN Jack
Used to connect the included PS-154 AC power
adaptor. (page 13)
zDAMPER PEDAL Jack
Used to connect the included F-10H single pedal to the EP3
digital piano. (page 12)
zSOUND SELECTION BUTTONS
The SOUND SELECTION buttons are used
to select the sound(s) that will be heard when
pressing the keys. (page 14)
These buttons can also be used to select
RECORDER songs and parts. (page 30)