Page
20
Step 4
Press the ORGAN button three times.
Step 5
Press and hold the SPLIT button, then press the HARPSI/MALLETS button twice.
2
1
Press and hold the button
Step 6
Press the T or S VALUE/BALANCE buttons to adjust the volume balance between the Upper and
Lower sections.
The sum of the Upper and Lower sections volume balances will always total 10 (e.g. '1-9', '5-5', '9-1', etc.), with larger
Step 7
Press the SPLIT button to deactivate split mode.
When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower
The influence of the damper pedal over the Lower section can also be turned on and off. Please refer to the
Press three times
values producing greater volume.
section. Please refer to the instructions on page 43 for more information.
instructions on page 44 for more information.
The LED indicator for the ORGAN button will
turn on.
'1-3' will be shown in the LED display, indicating
t h a t t h e U p p e r s e c t i o n s o u n d h a s b e e n
changed to Church Organ.
The LED indicator for the HARPSI/MALLETS
button will start to fl ash.
2
'2-3' will be shown in the LED display, indicating
Press twice
that the Lower section sound has been changed
to Vibraphone.
The current volume balance between the Upper
and Lower sections will be shown in the LED
display.
The LED indicator for the SPLIT button will turn
off.