Lower Octave Shift - Kawai EP3 Owner's Manual

6) LOWER OCTAVE SHIFT

When using SPLIT mode, this function allows the Lower section to be raised by one, two, or three octaves.
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the ORGAN button.
2
1
Press the ORGAN button Press and hold both buttons
The name of the function 'Lot' (Lower Octave) and the current settings will be shown in the LED display.
… Step 2
Press the T or S VALUE/BALANCE buttons to increase or decrease the Lower Octave Shift to the
desired value.
The Lower Octave Shift value can be set within the range of 0 to 3.
… Step 3
Press the TOUCH or TRANSPOSE button to exit Lower Octave Shift setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and ORGAN buttons will stop fl ashing.
„ Any changes made to the Lower Octave Shift setting will remain until the power is turned off.
„ When the power is turned off, the Lower Octave Shift setting will return to the default value of '0', however it is possible
to use the Memory Backup function to store the preferred Lower Octave Shift value. Please refer to the instructions on
page 56 for more information.
The LED indicators for the TOUCH, TRANSPOSE, and ORGAN buttons
will start to flash, indicating that the Lower Octave Shift function has been
selected.
LOWER OCTAVE SHIFT
Page
43
4