Liebert 7400 Series User Manual page 5

7400 Series UPS
Single and 1+1 IOM Manual
This is a UPS for restricted sales distribution to informed partners with the appropriate
EMC technical competence. Installation restrictions or additional measures may be needed
To convert to a class `A' UPS, the following factory installed
When fitted with the above optional e.m.c. kits the following warning applies:
This is a class `A' UPS product. In a domestic environment this product
This equipment complies with the requirements of the EMC Directive 89/336/EEC
Continued compliance requires installation in accordance with these instructions
ELECTRO MAGNETIC COMPATIBILITY
to prevent disturbances (EMC Standard 50091-2).
optional e.m.c. kits must be fitted:
80 kVA Module - Option kit part number 4641018 S
120 kVA Module - Option kit part number 4641014 O
200 kVA Module - Option kit part number 4641029 D
300 kVA Module - Option kit part number
400 kVA Module - Option kit part number
may cause radio interference in which case the user may be
required to take additional measures.
and the published technical standards.
and the use of manufacturer approved accessories only.
6310018a.02.doc
WARNING
-
-
Prelim iii
(02/98)
Issue 2