Test Run; Maintenance - Craftex CX401 User Manual

TEST RUN

Once you have assembled your machine
completely, it is then time for a test run to
make sure that the machine works properly
and is ready for operation.
During the test run if there is any unusual
noise coming from the machine or the
machine vibrates
machine immediately and disconnect from
the power source and investigate if you can
find out the problem with your machine.
If you find any part of the machine that is
not assembled properly, read the assembly
section of manual and re-assemble that
part according to the instructions provided.
Before starting the dust collector, make
sure that you have read and understood
the manual and you are familiar with the
functions and safety features on this
machine. Failure to do so may cause
serious personal injury.
12
strangely, stop the
Read the
manual

MAINTENANCE

During the life time of your machine, you
will need to practice
maintenance to keep your cyclone dust
collector in peak performance condition.
The following should be checked daily, after
use:
Loose mounting parts and screws
Damaged wires
Plastic bag leak
Suction Leaks
Any condition that can make the
operation unsafe
WARNING
Always turn off
disconnect the cord from the power
source, before performing maintenance.
Failure to do so may result in serious
personal injury.
some regular
the machine and