Summary Of The System Main Functions - Siemens IC60 User Manual

Summary of the system main functions

5 Summary of the system main functions
Function
Full or Partition Arm
Full Arm
Disarm during exit
Disarm
Arm Partition
Arm Stay
Arm Stay
Disarm Stay
Disarm Stay
Bypass
Initiate Panic
Initiate Medical
Alarm
Initiate Fire Alarm
Memory
Chime Enable/disable
Control
Change or Add
Users code
Customize keypad
Increase LCD backlight
level
Decrease LCD backlight
level
Increase Keypad button
backlight level
Decrease Keypad button
backlight level
Increase buzzer tone
Decrease buzzer tone
20
Building Technologies
Fire Safety & Security Products
The main functions of the system are listed in the table below.
Keys Description
<CODE> & ◄┘ Initiates full arm
<ARM> Initiates full arm
<ARM> Disarms the system during the
exit delay
<CODE> & ◄┘ Disarms the system
<A> or <B> Arms partition A or B
<STAY> & <CODE> ◄┘ Initiates partial alarm when the
user is at home
>STAY> Initiates partial alarm when the
user is at home
<CODE> & ◄┘ Disarms the system
<STAY> Disarms the system
<BYPASS> & Zone# ◄┘ Bypasses the zone #
<♫> & <CTRL> Activates emergency alert
<♫> & <B> Activates emergency alert
<A> & <B> Activates emergency alert
<UP> Arrow Initiates display of events from
memory.
◄┘ Cancels memory readout
<♫> Enable or disable chime function
<CTRL> & Device# ◄┘ Activates or deactivates outputs
and devices
<PROG> & <Master Activates program mode to add
CODE> ◄┘ or change user codes
<CTRL> & <LEFT> arrow Enters Local Edit Program mode
<CTRL>&<STAY< Hold <>CTRL and press <STAY>
repeatedly to increase light
<CTRL>&>BYPASS> Hold <CTRL> and press <BY-
PASS> repeatedly to decrease
light
<CTRL> & <UP> Hold <CTRL> and press <UP>
arrow arrow repeatedly to increase light
<CTRL> & <DOWN> Hold <CTRL> and press
arrow <DOWN> arrow repeatedly to
decrease light
<CTRL> & <A> Hold <CTRL> and press <A>
repeatedly to increase buzzer
tone
<CTRL> & <B> Hold <CTRL> and press <B>
repeatedly to increase buzzer
tone
Summary of functions
Tab. 6
When an operation has started incorrectly, press <ENTER> ◄┘ to exit and return to the previous
mode.
Pressing the <PROG> key for 2 sec returns back to the basic position.
Notes
Only if enabled by installer
Only when slow beeping is emitted
Stopping alarms
Press A or B for
2 seconds to arm the partition in account –
only if enabled by installer
Only if enabled by installer
Repeats the procedure to un-bypass
zones
Press simultaneously during 2 seconds
Press simultaneously during 2 seconds
Press simultaneously during 2 seconds
Displays events and automatically scrolls
to the next event after 2.5 sec. (Use arrow
key to scroll manually)
Holds the key for 2 sec to alternate. Only if
enabled by installer
Press <CTRL> for 2 seconds
Press <CONTROL> and then <ARM> and
hold both simultaneously for 2 sec
009929_a_en_--.doc
11.2006