Table of Contents
Advertisement
RB-6 L-801A (Airport) Rotating Beacon (Export)
6. Operation
(contd.)
7. Action in the Event of a
System or Component
Malfunction
8. Maintenance and Repair
2001 Siemens Airfield Solutions, Incorporated
All rights reserved
•
Before starting this equipment, check all safety interlocks, fire-
detection systems, and protective devices such as panels and covers.
Make sure all devices are fully functional. Do not operate the system if
these devices are not working properly. Do not deactivate or bypass
automatic safety interlocks or locked-out electrical disconnects or
pneumatic valves.
•
Never operate equipment with a known malfunction.
•
Do not attempt to operate or service electrical equipment if standing
water is present.
•
Use this equipment only in the environments for which it is rated. Do
not operate this equipment in humid, flammable, or explosive
environments unless it has been rated for safe operation in these
environments.
•
Never touch exposed electrical connections on equipment while the
power is ON.
Do not operate a system that contains malfunctioning components. If a
component malfunctions, turn the system OFF immediately.
•
Disconnect and lock out electrical power.
•
Allow only qualified personnel to make repairs. Repair or replace the
malfunctioning component according to instructions provided in its
manual.
Allow only qualified personnel to perform maintenance, troubleshooting,
and repair tasks. Only persons who are properly trained and familiar with
Siemens Airfield Solutions equipment are permitted to service this
equipment.
•
Always use safety devices when working on this equipment.
•
Follow the recommended maintenance procedures in your equipment
manuals.
•
Do not service or adjust any equipment unless another person trained in
first aid and CPR is present.
•
Connect all disconnected equipment ground cables and wires after
servicing equipment. Ground all conductive equipment.
•
Use only approved Siemens Airfield Solutions replacement parts.
Using unapproved parts or making unapproved modifications to
equipment may void agency approvals and create safety hazards.
96A0221B
Issued 5/01
Safety
Page 1-4
Advertisement
Table of Contents
