Weber SP 100 LP Owner's Manual page 22

Step 23
Complete accessory installation
You will need: warming rack, work table, accessory
rack, three tubing plugs, thermometer and a hammer.
Set the warming rack into the slots at the rear of the
cooking box. Figure 30 (a).
Set the work table onto the left side rails. Figure 30 (b).
Set the accessory rack in place between the two frame
connectors. Figure 30 (c).
Insert the thermometer into its holder. Figure 30 (d).
Insert the tubing plugs into the ends of the frame. To
fully seat the plugs, you may have to tap them lightly
with a hammer. Figure 30 (e).
(d)
(a)
(b)
(e)
(c)
Figure 30
Caution: To keep the barbecue stationary, the tabs
on the locking casters should be in the down
position.
22