Weber Genesis 5000 LP Owner's Manual page 18

Step 16
Install manifold bracket
You will need: manifold bracket
Hook the bracket onto the manifold at the center burner
valve. Figure 19. Place your hand underneath the
bracket. Lift the bracket, manifold and cooking box
slightly as a unit and hook onto the frame brace.
Figure 19
Manifold bracket
Frame brace
Step 17
Install brace panel
You will need: brace panel.
Slide the side burner back. Insert the tabs into the slots
in the frame brace at the wheel legs. (Make sure the
side burner hose is to the front of the barbecue.)
Figure 20 (a). Slide up until the notch at the bottom of
the brace panel fits over the cross brace. Figure 20 (b).
Frame brace
Side burner
hose
Figure 20
Cross brace
18
Slot in frame brace
(a)
Tabs on
brace panel
(b)