Product Specifications; Table 1-1 Docsis Specifications - ZyXEL Communications P-964 User Manual

Built-in Diagnostic Features
P964 APR support remote troubleshooting via CMTS-initiated diagnostics, eliminating visit by a technician. The front panel status
indicator LEDs and web based status monitoring are also incorporated to easy diagnostics from LAN interfaces.
SNMP
SNMP (Simple Network Management Protocol) is a protocol used for exchanging management information between network devices.
SNMP is a member of TCP/IP protocol suite. Your P964 APR supports SNMP agent functionality, which allows a manager station to
manage and monitor the P964 APR through the network. The P964 APR supports SNMP version one, two and three.(SNMP v1, v2
and v3).
Network Address Translation (NAT)
NAT (Network Address Translation - NAT, RFC 1631) allows the translation of an Internet Protocol address used within one network
to a different IP address known within another network.
DHCP (Dynamic Host Configuration Protocol)
DHCP (Dynamic Host Configuration Protocol) allows the individual client computers to obtain the TCP/IP configuration at start-up
from a centralized DHCP server. The Prestige has built-in DHCP server capability, enabled by default, which means it can assign IP
addresses, an IP default gateway and DNS servers to all systems that support the DHCP client.
Web based Management & Configuration
The P964 APR supports web based management and configuration interface.
Text based configuration file
The P964 APR supports text based configuration file download and hence makes router deployment simplified.
TACACS+ server support
The function allows access control to all interfaces for MSO to connect to TACACS+ server for telnet authentication.
Predefined frequency band setting
This function assist the installation procedure by specifying predefined frequency band to accelerate the downstream scanning at the
first time the cable router is getting on line.
Hardware reset to factory default
The hardware reset button supports reset to factory default user name and password of user interfaces.
High throughput wireless data access
802.11g at 54Mbps ultra high wireless
1.5

Product Specifications

Table 1-1 Table 1-Table
~
CLASS
Operating Frequency
Modulation
Channel Width
Input Impedance
Maximum Data Rates
Receive Input Level
Transmission Output Power
* With A-TDMA or S-CDMA enabled CMTS
** Speed of 30Mbps is attainable only with A-TDMA or S-CDMA technology.
Getting to Know Your P964 APR
connectivity.
1-1 list the P964 APR specifications including the DOCSIS 2.0 standards and its general specifications.

Table 1-1 DOCSIS Specifications

DOWNSTREAM
88MHz ~ 860MHz
64/256QAM
6MHz
75 ohms Nominal
38.00 Mbps
–15 dBmV to +15 dBmV
Prestige 964 Cable Router with 802.11g Access Point
FEATURES
UPSTREAM
5MHz ~ 42MHz
QPSK or 8*/16/32*/64*/128*QAM or
QPSK
200/400/800/1600/3200/6400* kHz
75 ohms Nominal
30 Mbps**
A-TDMA:
+8 dBmV ~ +54 dBmV (32/64QAM)
+8 dBmV ~ +55 dBmV (8/16 QAM)
+8 dBmV ~ +58 dBmV (QPSK)
S-CDMA:
+8 dBmV ~ +53 dBmV (all modulation)
1-3