Table of Contents
Advertisement
Chapter 4 Special Features and Utilities
Chapter 4 Special Features and Utilities
RAID (Redundant Array of Independent Disks)
With the latest chipsets implemented, SiS 964 provides RAID 0 and RAID 1
function for the Serial ATA hard disks. You may use RAID BIOS Setting Utility
provided by SiS to setup your disk array. For more RAID introduction, please visit
our website:
http://english.aopen.com.tw/tech/techinside/RAID.htm
RAID BIOS Setting Utility (for s760GXm-SL / s760GXm-S
only)
In order to make sure your system can recognize and operate Serial ATA RAID
device smoothly, we have to enter RAID BIOS Setting Utility to do some
configuration. After finishing the BIOS setup and reboot, you will see [Press
<CRTL><S> to run BIOS Setting Utility] about half way through the boot up.
When you enter you will be presented with a screen as shown below. You can use
this utility to create or delete your disk arrays.
Silicon Integrated Systems Corp. RAID BIOS Setting Utility v1.xx
(c) 2003-2005 Silicon Integrated Systems Corp.All Right Reserved.
Press <CTRL><S> to run BIOS Setting Utliity
Scan Device. Please Wait.............
Primary Master
Primary Slave
Secondary Master
Secondary Slave
［RAID Information］
: xxxxxxxx
xxxxxxMB
: <Device Not Found>
: <SATA Device Not Found>
:
xxxxxxxx
xxxxxMB
32
UDMA 5
UDMA 5
Advertisement
Table of Contents
