Table of Contents
Advertisement
3.4 Jumper Settings
JP28 Keyboard / Mouse
Wakeup Jumper
JP14 Clear CMOS Data
This motherboard provides PS2 keyboard / mouse
wake-up function.
JP28 Keyboard / Mouse Wakeup Jumper
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
31
1
Disable
Enable
(Default)
JP14 Clear CMOS Jumper
1
1
Normal
Clear CMOS
(Default)
1
Advertisement
Table of Contents
