Chapter 4 Special Features And Utilities; Raid (Redundant Array Of Independent Disks); Raid Configuration Utility - AOpen n250a-FR Manual

Hide thumbs Also See for n250a-FR:

Table of Contents

Chapter 4 Special Features and Utilities

This motherboard supports RAID 0, RAID 1 and RAID 0+1 (n250a-FR only)

functions. For more RAID introduction, please visit our website:

http://english.aopen.com.tw/tech/techinside/RAID.htm

Nvidia nForce3 250 chipsets support RAID 0 and RAID 1 functions. In order to

make sure your system can recognize and operate Serial ATA RAID device

smoothly, we have to enter RAID Configuration Utility to do some settings. After

finishing the BIOS setup and reboot, you will see [Press F10 to enter RAID setup

utility] about half way through the boot up. Pressing F10 immediately, you will

later be presented with a screen as shown below, You can use this utility to create

or delete your disk arrays.

NVIDIA RAID IDE ROM BIOS 4.34

Detecting array...

Press F10 to enter RAID setup utility

SiI 3114 SATARAID BIOS Version 5.0.34

Press <Ctrl+S> or F4 to ebter RAID utility

Note: F

or operating RAID 0 or RAID 1 smoothly, user has to install both NVIDIA

RAID CLASS DRIVER and NVIDIA NForce Storage Controller.

Table of Contents

N250a-l N250a