Table of Contents
Advertisement
4. O
PERATION
Control Panel
Operation
Menu Map
Configuration
(DMX)
Starting Address
Mini 4 Bar™ 2.0 User Manual Rev. 6
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the buttons location on the
control panel.
Button
Press to find an operation mode or to back out of the current menu
<MENU>
option
<DOWN>
Press to scroll down the list of options or to find a higher value
<UP>
Press to scroll up the list of options or to find a lower value
<ENTER>
Press to select the value selected
Mode
Programming Steps
DMX
512
Sound-Active
SND
Automatic
AUTO
Set this product in DMX mode to control it with a DMX controller.
1.
Connect this product to a suitable power outlet.
2.
Turn this product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The Mini 4 Bar™ 2.0 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If
you
are
not
familiar
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 512 shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
Description
Puts the fixture in DMX operating mode
d. 1~d.512
and selects the DMX starting address
Triggers the sound-active program to the
-
music, using the internal microphone
Selects one of the built in programs
S 1~100
Adjusts the speed of the automatic
program
with
DMX,
download
the
DMX
Primer
from
Page 9 of 15
Advertisement
Table of Contents
