Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Page 8 of 15
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section.
The Mini 4 Bar™ 2.0 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
This product has multiple rigging options. They are as follows:
·
Floor Standing (using the two mounting/standing brackets)
·
Hanging (using the two mounting/standing brackets)
·
Hanging (using the two hanging clamp mounting points)
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. See the Technical Specifications for weight information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss. The bracket has a
13 mm hole, which is appropriate for this purpose.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity.
When power linking multiple products, you must always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
Pod pan
adjustment (x4)
Pod tilt
adjustment (x8)
Tripod stand
adjustment knob
Mini 4 Bar™ 2.0 User Manual Rev. 6
Advertisement
Table of Contents
