I-Tech HD DriveCore Series Power Amplifiers
7 Advanced Operation
7.7.1 Amplifier DSP Selection Screen
On the left of this screen is the Input and Output Signal Level Monitor (explained later on this page). On the right
side are rows of DSP selection buttons for each channel. When you double click on a button, a control panel opens
for that button's function.
Also on the right are buttons that open control panels for these functions:
• Amplifier mode (dual, bridge-mono, input Y)
• Signal generator (pink noise and sine wave)
• Amplifier information
• Recall and store presets
• Preset manager
• Apply to others (apply this amplifier's DSP settings to other devices)
We'll explain each of these functions on the next several pages.
7.7.2 Amplifier Mode
This is accessed by double clicking the mode button.
Operation Manual
page 30