Table of Contents
Advertisement
INSTALLING
103415
A qualified service person must install fireplace. Follow all local codes.
Never install the fireplace
• in a bedroom or bathroom
• in a recreational vehicle
• where curtains, furniture, clothing, or other flammable objects are less than
36 inches from the front, top, or sides of the fireplace
• in high traffic areas
• in windy or drafty areas
Models VSGF28PTB/CSGF28PTB have a three-prong, grounded electrical plug.
This plug helps protect you against electrical shock. Only connect plug to a
properly grounded, three-prong receptacle. Do not cut or remove the grounding
prong from this plug.
This fireplace creates warm air currents. These currents move heat to wall sur-
faces next to fireplace. Installing fireplace next to vinyl or cloth wall coverings or
operating fireplace where impurities in the air (such as tobacco smoke) exist, may
discolor walls.
IMPORTANT:
Vent-free heaters add moisture to the air. Although this is beneficial, installing
fireplace in rooms without enough ventilation air may cause mildew to form from too much
moisture. See Air for Combustion and Ventilation, pages 6 through 8.
IMPORTANT:
Make sure the fireplace is level. If fireplace is not level, log set will not work
properly.
CHECK GAS TYPE
Use only propane gas. If your gas supply is not propane gas, do not install fireplace. Call dealer
where you bought fireplace for proper type fireplace.
ELECTRICAL HOOKUP (Models VSGF28PTB/CSGF28PTB )
This fireplace has a blower assembly with an electrical cord. The electrical cord is five feet in
length. You must locate fireplace within reach of a 120 volt grounded electrical outlet. If not,
you must install an electrical outlet within reach of fireplace power cord.
INSTALLING HOOD
Install hood to top of fireboxas shown in Figure 5. Use 3 Phillips screws provided.
NOTICE
WARNING
WARNING ICON
G 001
WARNING
CAUTION
WARNING ICON
G 001
Figure 5 - Installing Hood to Firebox
Continued
9
Hide quick links:
Advertisement
Table of Contents
