Desa UNVENTED (VENT-FREE) PROPANE/LP GAS FIREPLACE Owner's Operating & Installation Manual page 21

INSTALLING
Continued
103415
4. Place the crossover log (#5) on the back log and the top middle log. Make sure the peg on
the rear log is in the hole in the bottom of the crossover log. The crossover log should fit in
the cutout of the top middle log (see Figure 27).
Cutout
You must operate this fireplace with the fireplace screen in place. Make sure
fireplace screen is in place before running fireplace.
5. Install fireplace screen by slipping notches of fireplace screen over screws on front of
fireplace (see Figure 28).
Notches
Crossover
Log (#4)
Figure 27 - Installing Crossover Log (#5)
WARNING
WARNING ICON G 001
Figure 28 - Installing Fireplace Screen
Hole
Peg
Screws for
Mounting
Screen
21