Redial Function; Mute Button; Direct Dialling - Doro 610 Manual

Redial function

Press and scroll among the 10 most recently dialled numbers using
r
redial the selected number.

Mute button

The microphone can be turned off/on during a call using
KeyGuard
The KeyGuard is turned off/on by pressing and holding

Direct Dialling

This feature allows a preset number to be dialled regardless of which button is pressed
(except ). When active the stored number and BB will be displayed.
º
Storing the Direct Dial Number
1. Press
.
º
3
2. Enter the PIN number (0000 when supplied). Press
3. Enter the telephone number (up to 18 digits). Press
Turning Direct Dial On/Off
1. Press .
º
2
2. Enter the telephones PIN number (0000 when supplied). Press
3. Press
to confirm.
º
Memory
This telephone has 10 memory locations numbered 0-9.
Storing telephone numbers
1. Press
.
º b
2. Select a memory location (0-9) by repeatedly pressing
3. Enter the telephone number (up to 18 digits). Press
Please note!
If you need to insert a pause in the telephone number, press and hold
If you need to change a number, store the new number in the same location as the old one.
Dialling Stored Telephone Numbers
1. Repeatedly press
memory position directly by pressing
2. Press
to dial the displayed number.
q
Erasing ALL Stored Telephone Numbers
Press
º b º
0
until the number required is displayed. You can also enter the
b
.
English
C
#.
º
(
º
b
(
º
0
then the relevant memory location
b

. Press
r
( = mic off).
z
.
=delete).
C
.
º
.
=delete).
C
until the display shows P.
. to
q
- .
0 9