Replacing The Headlight Bulb - Yamaha AEROX YQ50 Owner's Manual

Hide thumbs Also See for AEROX YQ50:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND ADJUSTMENT
Specified fuse:
7.5 A
3. Turn the key to "
the electrical circuits to check if the
devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6

Replacing the headlight bulb

If the headlight bulb burns out, replace
it as follows.
" and turn on
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Remove cowling A. (See page
6-6.)
2. Disconnect the headlight coupler.
3. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt out bulb.
1
ZAUM0283
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Connect the coupler.
EAUM2111
6. Install the cowling.
7. Have a Yamaha dealer adjust the
ECA10670
6-21
headlight beam if necessary.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox yq50l

Table of Contents