Replacing A Headlight Bulb - Yamaha BWS 2003 Owner's Manual

1
ZAUM0496
1. Screw (x2)

Replacing a headlight bulb

1. Remove front cover by removing
the screws.
2. Remove the headlight coupler.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
ZAUM0325
1. Headlight bulb holder
EAUM0072
3. Remove the headlight bulb holder
by turning
counterclockwise.
4. Remove the defective bulb.
Headlight bulbs get very hot.
Therefore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.
5. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely
affected. Thoroughly clean off any
dirt and fingerprints on the headlight
it 1/4 turn bulb using a cloth moistened with
alcohol or thinner.
EW000119
6-20
6. Connect the headlight coupler and
install the front cover.
EC000105
6