Checking And Lubricating The Centerstand; Checking The Front Fork - Yamaha AEROX YQ50 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Checking and lubricating the
centerstand
ZAUM0455
1. Centerstand
The operation of the centerstand
should be checked before each ride,
6
and the pivots and metal-to-metal con-
tact surfaces should be lubricated if
necessary.
WARNING
If the centerstand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the centerstand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
EAU23192
Recommended lubricant:
Lithium-soap-based grease
1
EWA11301

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the vehicle on a level sur-
2. While applying the front brake,
6-17
face and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10751]
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
EAU23272