Pre-Operation Check List - Yamaha BWS CW50 Owner's Manual

Pre-operation check list

ITEM
Fuel
2-stroke engine oil
Final transmission oil
Front brake
Rear brake
Throttle grip
Wheels and tires
Brake levers
Centerstand
• Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage.
• Check oil level in oil tank.
• If necessary, add recommended oil to specified level.
• Check vehicle for oil leakage.
• Check oil level and vehicle for oil leakage.
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add recommended brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.
• Check lever free play.
• Adjust if necessary.
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
PRE-OPERATION CHECKS
CHECKS
4-2
EAU15601
PAGE
3-7
3-8
6-7
4
6-13, 6-14
6-13
6-9, 6-15
6-10, 6-12
6-16
6-16