Indicator And Warning Lights - Yamaha BWS CW50 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Indicator and warning lights

CW50/CW50L
1
3
4
ZAUM0554
1. Left turn signal indicator light "
2. Right turn signal indicator light "
3. High beam indicator light "
4. Oil level warning light "
EAU11001 CW50N
2
ZAUM0522
1. Fuel level warning light "
3
2. High beam indicator light "
3. Oil level warning light "
"
4. Turn signal indicator light "
"
"
"
Turn signal indicator lights "
" " (CW50/CW50L)
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
Turn signal indicator light "
(CW50N)
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
1 2 3 4
"
"
"
"
EAU11030
" and
EAU11020
"
3-2
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil level warning light "
This warning light comes on when the
key is in the " " position or when the oil
level in the 2-stroke engine oil tank is
low during operation. If the warning
light comes on during operation, stop
immediately and fill the oil tank with Ya-
malube 2 or equivalent 2-stroke engine
oil of either JASO grade "FC" or ISO
grades "EG-C" or "EG-D". The warning
light should go off after the 2-stroke en-
gine oil tank has been refilled.
NOTE:
If the warning light does not come on
when the key is in the " " position or
does not go off after the 2-stroke en-
gine oil tank has been refilled, have a
Yamaha dealer check the electrical cir-
cuit.
EAU11080
"
EAU11180
"