Replacing The Tail/Brake Light Bulb - Yamaha BWS CW50 Owner's Manual

3
2
ZAUM0572
1. Push in and turn counterclockwise.
2. Remove the bulb.
3. Headlight bulb
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new bulb into position, and
then secure it with the bulb holder.
5. Install the cowling.
6. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
1
bulb
1. Remove the tail/brake light lens by
removing the screws.
EWA10790
ZAUM0573
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24131
1
ZAUM0574
1. Remove tail/brake light lens.
2. Tail/brake light bulb
3. Insert a new bulb into the socket,
4. Install the lens by installing the
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-21
2
push it in, and then turn it clock-
wise until it stops.
screws.
1
6
ECA10680