Replacing The License Plate Light Bulb - Yamaha XMax YP400RXMAx YP400RA Owner's Manual

1
ZAUM1038
1. Turn signal light bulb socket
6. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
1
2
ZAUM1039
1. Turn signal light bulb
2. Turn signal light bulb socket
7. Install the socket (together with
the bulb) by turning it clockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
8. Place the rear storage compart-
ment in the original position and
install the bolts.
9. Close the seat.
6-34
Replacing the license plate
light bulb
1. Remove the socket (together with
the bulb) by pulling it out.
1
ZAUM1041
1. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in.
EAUM2203
6