Table of Contents
Advertisement
NETWORK menu (continued)
Network factory default
You can reset the network setting to the factory default of the projector.
1
Press ▲ ▼ to select [Network factory default], and press <ENTER> button.
2
A confirmation box appears and select [Yes] and then press <ENTER> button. Another
confirmation box appears and select [Yes] and then press <ENTER> button.
Input
PC adjust
Image select
Image adjust
Screen
Setting
Information
Network
Exit
Connecting with Wired LAN
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1
Turn on the computer.
2
Make the network setting according to your system administrator.
If the projector settings are the default settings, the computer can be used with the following network
settings.
DHCP
IP address
Subnet mask
Default gateway
DNS 1
DNS 2
10
Projector name
Network setup
Network control
Network status
Network factory default
Back
Move
Off
192.168.10.101
255.255.255.0
192.168.10.1
Exit
Exit
Next
Return to Network factory default ?
Yes
No
Move
Enter
Return to Network factory default ?
Yes
OK ?
Yes
No
Move
Enter
Advertisement
Table of Contents
