Network Factory Default; Connecting With Wired Lan; Computer Operation - Panasonic PT-LX26HU Operating Instructions Manual

NETWORK menu (continued)

Network factory default

You can reset the network setting to the factory default of the projector.
1
Press ▲ ▼ to select [Network factory default], and press <SELECT> button.
2
A confirmation box appears and select [Yes] and then press <SELECT> button.
Another confirmation box appears and select [Yes] and then press <SELECT>
button.

Connecting with Wired LAN

Computer operation

Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1
Turn on the computer.
2
Make the network setting according to your system administrator.
If the projector settings are the default settings (See page 7), the computer can be used with the following
network settings.
DHCP
IP address
Subnet mask
Default gateway
DNS 1/DNS 2
Off
192.168.10.101
255.255.255.0
192.168.10.1
NONE
9