Using Web Browser (continued)
Network config page
You can make detail network settings on projector, when connecting without the administrator authority or when
connecting through an access point (infrastructure mode).
1
Click [Detailed set up] in the menu.
2
Click [Change] to change the LAN settings.
To return to the previous window, click [Back].
3
Complete the detailed settings and click [Next].
When [Next] is clicked, the next page appears, enabling you
to complete the detailed settings as desired.
Settings performed here are the same as the settings
performed with the [Network] menu of the projector.
4
Click [Submit].
The settings will be registered.
Changing the setting of LAN while connected with LAN might disconnect the connection.
17