Table of Contents
Advertisement
Network
Network control
Set when you want to control the projector from a
computer connected to the network.
1 )
Press ▲ ▼ to select [Network control].
2 )
Press <ENTER> button to select [On]
or [Off] with the ▲ ▼ buttons.
Network status
This function shows the LAN setting environment of
the currently selected projector.
1 )
Press ▲ ▼ to select [Network status].
2 )
Press <ENTER> button or the ► button
to show the information of the current
projector status.
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery. For more details, visit the
following website.
http://www.amx.com/
1 )
Press ▲ ▼ to select
2 )
Press
<ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
RoomView
This function allows the projector to monitor and
control the projector through network with Crestron
RoomView.
1 )
Press ▲ ▼ to select
2 )
Press
<ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
This projector supports the following application
software from Crestron company.
• RoomView Express
• Fusion RV
• RoomView Server Edition
"Crestron RoomView" is a system developed by
Crestron Electronics, Inc. which collectively manage
and control multiple system devices connected via
the network, from a computer. This projector supports
"Crestron RoomView".
62
- ENGLISH
[AMX D.D.].
[RoomView].
For details of "Crestron RoomView", refer to the Crestron
z
Electronics, Inc. website (Provided only in English).
http://www.crestron.com/
For the download of "RoomView Express", refer to the
Crestron Electronics, Inc. website (Provided only in
English).
http://www.crestron.com/getroomview
Extron XTP
To carry out connection settings with XTP Transmitter
made by Extron. Visit the following website for details.
http://www.extron.com
1 )
Press ▲ ▼ to select
2 )
Press
<ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
Digital Interface Box
Display the Setup menu of the Digital Interface Box.
1 )
Press ▲ ▼ to select
Box] and press <ENTER> button.
Switch to the menu of Digital Interface Box.
z
Note
This function can be selected when Digital interface box
z
(ET-YFB100G) is connected to <DIGITAL LINK> terminal.
[RETURN] button will display in the operation GUIDE
z
of the Digital Interface Box MENU. In this projector ,the
[MENU] button equals to [RETURN] button.
This function is unavailable when [Extron XTP] is set to
z
[On].
Network factory default
You can reset the network setting to the factory
default of the projector.
1 )
Press ▲ ▼ to select [Network factory
default], and press <ENTER> button.
2 )
A confirmation box appears and select
[Yes] and then press <ENTER> button.
3 )
Another confirmation box appears and
select [Yes] and then press <ENTER>
button.
[Extron XTP].
[Digital Interface
Advertisement
Chapters
Table of Contents
