Table of Contents
Advertisement
Network
Network control
Set when you want to control the projector from a
computer connected to the network.
1 )
Press ▲ ▼ to select [Network control].
2 )
Press <SELECT> button to select [On]
or [Off] with the ▲ ▼ buttons.
Network status
This function shows the LAN setting environment of
the currently selected projector.
1 )
Press ▲ ▼ to select [Network status].
2 )
Press <SELECT> button or the ►
button to show the information of the
current projector status.
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery. For more details, visit http://
www.amx.com/.
1 )
Press ▲ ▼ to select
2 )
Press <SELECT>
or [Off] with the ▲▼ buttons.
58
- ENGLISH
[AMX D.D.].
button to select [On]
Network factory default
You can reset the network setting to the factory
default of the projector.
1 )
Press ▲ ▼ to select [Network factory
default], and press <SELECT> button.
2 )
A confirmation box appears and
select [Yes] and then press <SELECT>
button. Another confirmation box
appears and select [Yes] and then
press <SELECT> button.
Advertisement
Table of Contents
