Xerox Docupac Folders - Xerox DocuColor 40 Materials Usage Manual

Xerox Docupac Folders

DocuColor 40 MATERIALS USAGE GUIDE
Material Description and Expectations
Xerox Docupac Folders are designed for anyone who needs a small
quantity of customized folders quickly. This two sheet system
consists of a front that can be custom imaged on the DocuColor 40,
then manually attached to the back pocket portion of the folder.
The finished folders measure 8 3/4" x 11 3/4" and can hold up to 25
sheets of 20 lb / 75 g/m
included to display a business card. Docupac folders are available
in White, Gray, or Ivory and are made from 90 lb Index Stock.
Feeding and image quality performance will be similar to standard
x x
8.5 x 11" 90 lb Index paper, however, it will not match the image
quality of 24 lb Image Series LX.
Recommended Materials
USA and Canada:
Xerox Docupac Folders (90 lb index)
White = 3R4885
1 2 3. . .
Steps for Success
1
Docupac Folders must be run from the Paper Tray Bypass.
2
Load them short edge feed (9.5" / 241mm side lead edge) with the
score mark along the outboard side of the tray (the side closest to
the front of the machine).
3
Select Heavy Weight Paper Mode.
4
Enter the size input: X = 297mm; Y = 241mm.
5
In the added features, select Copy Position and set it to Auto
Center.
6
Place the original on the platen in landscape position with the top of
the original facing toward the left side of the machine.
2
xerographic/bond paper. A pocket is also
Gray = 3R4927 Ivory = 3R4928
USAGE GUIDELINES
29