Hole-Punched Papers - Xerox DocuColor 40 Materials Usage Manual

Digital color production system
Hide thumbs Also See for DocuColor 40:
Table of Contents

Advertisement

USAGE GUIDELINES

Hole-Punched Papers

16
Material Description and Expectations
Hole-punched papers have two or more holes along one edge for
use in ring binders and notebooks. This paper is often referred to as
predrilled paper. Most hole-punched papers that fit into the
standard paper size and weight ranges for the DocuColor 40 should
run reliably. The recommended papers meet the Xerox high quality
standards and will provide reliable feeding and good image quality.
Hole-punched papers are not compatible with the Stacker/Stapler
accessory and may cause jams. Use the Catch Tray or Sorter when
using hole-punched paper.
Recommended Materials
USA and Canada:
Xerox 24 lb Image Series LX, 3 hole drilled , 8.5 x 11" = 3R3875
1 2 3. . .
Steps for Success
1
Load hole-punched papers in paper trays 1, 2, or 3.
2
Load all heavy-weight, hole-punched papers (greater than 28 lb/105
2
g/m
xerographic/bond), in the Paper Tray Bypass.
3
Do not attempt to copy an image onto the area of the holes. This
will cause unwanted toner on the back of the copies/prints and may
lead to machine damage.
4
When copying from a hole-punched original onto hole-punched
paper, the holes on the original must be masked to prevent them
from printing out on the copies/prints. (See complete instructions in
the Hints and Tips section below.)
DocuColor 40 MATERIALS USAGE GUIDE

Advertisement

Table of Contents
loading

Table of Contents