Printer Settings; Notice For Cd/Dvd/Bd Writing And Printing - Epson Discproducer PP-50BD User Manual

Printer Settings

Printer name
Select Printer Name.
Note:
When changing the printer name, do not use Unicode characters. The device will not be recognized
correctly.
Failure error mark
If you check this check box, an error mark will be printed on any disc with a write error. This
is useful to identify the disc which encountered the write error.
The disc with the write error will be ejected to stacker 3.
Note:
The error mark will not be printed in the following cases.
❏ The job was canceled
❏ An incorrect disc type was found in the stacker
❏ Fatal error
❏ Not enough ink was left to print the error mark

Notice for CD/DVD/BD Writing and Printing

❏ Store the stacker out of direct sunlight. A warped or damaged stacker may stop the
product from operating normally.
❏ Use only CDs/DVDs/BDs labeled as suitable for printing, for example "Printable on the
label surface" or "Printable with ink jet printers."
❏ For more details on handling CDs/DVDs/BDs and for guidelines for writing data to
CDs/DVDs/BDs, refer to your CD/DVD/BD documentation.
❏ When using the product for the first time after storing it for a long time or after an error,
missing dots or ink stains may appear and print quality may be reduced. If publishing a
large number of discs, check print quality by publishing one disc in advance. If any dots
are missing, run head cleaning.
❏ When writing and printing discs separately, it is recommended to print after writing. If
you write discs after printing, ink may cause discs to stick to each other and result in a
transport error, or dirt, stains, or scratches on the disc may cause a write error.
25
Publishing Discs