Epson Discproducer PP-50BD User Manual page 40

Caution:
c
❏ For PP-50BD: Do not open the disc cover while the product is publishing discs, unless the
application instructs you to add or remove discs. This may affect write quality. Also, do not
put your hands inside the product while it is beeping, as the arm is still moving.
❏ For PP-50BD: Beep will sound if you open the disc cover while running a job, and the job
will pause. Closing the disc cover automatically resumes the job.
❏ For PP-50BD: Do not operate the stacker while the unit is beeping, as the arm may be
damaged.
❏ For PP-50BD: If you need to open the disc cover, pause or cancel your job before
opening it.
❏ For PP-50: When you open the disc cover while running a job (Busy indicator is flashing),
make sure the internal light has turned off and that the arm has stopped moving before
performing any operation, such as loading or taking out discs. Do not put your hands
inside the product or operate stackers while the arm is moving. Also, open and close the
disc cover gently.
❏ For PP-50: When you open the disc cover while running a job, the job will pause. Closing
the disc cover automatically resumes the job.
❏ Do not open the ink cartridge cover while running a job.
❏ Depending on the disc or the computer used, writing speed may become slower than the
set speed.
❏ Depending on the disc used, the recommended writing speed of the disc cannot be used.
In this case, reduce the writing speed. Especially with DVD±R DL and BD-R DL, it is
recommended to write with slow speed.
Note:
If Windows shuts down while processing a job, the job may be resumed when restarting Windows
next time.
40
Publishing Discs