Cisco SPA 303 User Manual page 10

Getting Started
Getting to Know the Cisco SPA 303
Cisco Small Business IP Phone SPA 303 User Guide (SIP)
# Phone Feature
4 Line keys
5 Softkey buttons
6 Navigation button
7 Messages button
8 Hold button
9 Setup button
10 Mute button
11 Headset button
12 Volume button
13 Speaker button
14 Keypad
Description
Indicates phone line status. Typically when lit:
• Green: Line is idle.
• Red (steady): Line is active or in use.
• Red (blinking): Line is on hold.
• Orange: Line is unregistered (cannot be
used).
• Flashing Orange: The phone is not
connected to the network.
Press a softkey button to perform the action shown
on the label on the LCD screen above. See
Buttons, page 9.
Press an arrow to scroll left, right, up, or down
through items shown on the LCD screen.
Press to access voice mail (must be set up by your
phone administrator).
Press to place a call on hold.
Press to access a menu to configure features and
preferences (such as your directory and speed dials),
access your call history, and set up functions (such
as call forwarding).
Press to mute or unmute the phone. When phone is
muted, the button glows red. A flashing mute button
indicates the network connection cannot be found.
Push to turn the headset on or off. When the headset
is on, the button glows green.
Press + to increase the volume and - to lower the
volume of the handset, headset, speaker (when the
handset is off the phone), or ringer volume (when
the handset is on the phone).
Push to turn the speaker on or off. When the speaker
is on, the button glows green.
Use to dial phone numbers, enter letters, and choose
menu items.
1
Softkey
8