Voice Alert Tab; White Led Tab; Illuminator Level - Sony Ipela SNC-CX600W User Manual

Voice alert Tab

Set the voice alert function, to output audio from the
speaker of the camera, when an alarm is triggered by the
detection functions.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool. You can download the application guide and SNC
audio upload tool from the following URL.
http://www.sony.net/ipela/snc
Voice alert 1, 2, 3
Up to three voice alerts can be set. Configure the
following setting for each voice.
File
Displays the name of the audio file saved in the camera.
"Not uploaded" is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting an audio file, set Voice alert 1, 2 or 3 to
Off.
Voice alert is included in the Execution Condition tab of
the Action output menu.
Test
When an audio file is saved in the camera, you can check
it by playing it back.
Click Play to play back the audio file.
Repeat
Select playback repeat time from 1 to 3.
Notes
• If voice alert is actively linked with a different alarm
type while another voice alert is occurring, the first
voice alert is cancelled and the second one is output.
• When you play back a test, do not set Voice alert in
the Execution Condition tab of the Action output
menu to Off.
• If two or three audio files are set to be output
simultaneously linked with the same alarm type,
priority is given in the order Voice alert 1, 2 then 3.
OK/Cancel
See "Buttons common to every menu" on page 19.
52
Setting the Action output — Action output Menu

White LED tab

Make the setting of the Illuminator level and lighting
time of the Presence Sensor detection and White LED.

Illuminator level

Select the White LED Illuminator level from 1 to 6.
1 is the weakest and 6 is the strongest one.
Test
Perform the lighting test of the White LED.
When you press the execute button, the LED lights up
with the illuminator level you set. When you press the
stop button, the LED turns off.
A message appears if you press the execute button after
changing the illuminator level. Click OK if you want to
change the illuminator level setting.
Duration
Select the White LED lighting time from 5 seconds to
30 minutes.
Tip
The lighting time will be extended if the Presence
Sensor detection is continuing.
OK/Cancel
See "Buttons common to every menu" on page 19.