Monitor Image; Plug-In Free Viewer; Using Solid Ptz Function; Monitor Screen - Sony Ipela SNC-CX600W User Manual

Monitor image

The image shot by the camera is shown here.
There are two modes for on-screen pan/tilt/zoom
operation using a mouse: Area zoom mode and Vector
dragging mode.
In the Area zoom mode, click to adjust the camera
direction to the center of the image. The Area zoom will
move the camera in the direction that displays the area
selected by the operator and zooms in at the same time.
The operator can choose a part of the image to view and
zoom in by surrounding an area with a frame by
dragging the mouse.
In the Vector dragging mode, the camera moves to the
dragged direction. How long you drag the mouse
determines the speed. Releasing the button on the mouse
after dragging stops the panning or tilting of the camera.
You can also use the camera control panel bar to change
the camera direction.
The zoom operation using the mouse wheel is available
in all modes.

Plug-in free viewer

Live viewer using Plug-in free viewer
Display sample:
Control bar

Monitor screen

Monitor screen
There are two modes for on-screen pan/tilt/zoom
operation using a mouse: Area zoom mode and Vector
dragging mode. A control bar is displayed on the screen.
In the Area zoom mode, click to adjust the camera
direction to the center of the image. The Area zoom will
move the camera in the direction that displays the area
selected by the operator and zooms in at the same time.
The operator can choose a part of the image to view and
zoom in by surrounding the area with a frame by
dragging the mouse.
In the Vector dragging mode, the camera moves to the
dragged direction. How long you drag the mouse
determines the speed. Releasing the button on the mouse
after dragging stops the panning or tilting of the camera.
You can also use the tool bar to change the camera
direction.
The zoom operation using the mouse wheel is available
in all modes.
Control bar
The following operation buttons are available.
Setting
You can set the streaming method, image size,
frame rate, PTZ operation mode and image codec.
Streaming start button
Starts streaming. (Appears while stops streaming.)
Streaming stop button
Stops streaming. (Appears while streaming.)
Save still image button
Captures still images taken by the camera and saves
them to the computer.

Using Solid PTZ function

You can operate the camera by using the Solid PTZ
function, which provides panning, tilting and zooming
by adjusting the position and zooming ratio from the
maximum image size (1280 × 720), without moving the
camera. There are three modes of camera operation:
Area zoom mode, Vector dragging mode and PTZ
Control bar. You can control pan/tilt and zoom in either
mode.
The available functions for the camera operation modes
vary according to the live viewer display. The available
functions are as follows.
13
Configuration of Live Viewer