Fujitsu ScanSnap SV600 Basic Operation Manual page 120

a If the message "The recommended privileges have been applied." appears, turn off the
ScanSnap and then turn it on again. Make sure to leave at least 5 seconds between
turning off and on the ScanSnap.
If the message "Failed to change the privileges. Uninstall ScanSnap Manager then install it again."
appears or the problem still persists, proceed to step 7.
7.
Recover the connection with the ScanSnap.
1. Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Support Tool]
(for Windows 8, right-click the Start screen, and select [All apps] on the app bar →
[ScanSnap Support Tool] under [ScanSnap Manager]).
a The [ScanSnap Support Tool] dialog box appears.
2. Click the [Recover] button on the [Recover] tab, and proceed by following the instructions
displayed on the screen.
When ScanSnap Manager Does Not Operate Normally
120