Drives; Power Distribution Units (Only For Regions Other Than Emea&I); Figure 1.23 Power Distribution Unit (Ac200-240V, 1U, Max 2 Enclosures Connection); Table 1.7 3.5" Drive Specifications - Fujitsu ETERNUS DX80 S2 User Manual

Chapter 1 Hardware Configurations
1.5 Power Distribution Units (Only for Regions Other than EMEA&I)
1.4.2

3.5" Drives

The following table shows the 3.5" drive specifications.
Table 1.7 3.5" drive specifications
Drive name
SAS disks
Nearline SAS disks
SSDs
1.5 Power Distribution Units (Only for Regions Other than
EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
A power distribution unit is an option to connect power supply units to power outlets when power sockets are
limited.
■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures
connection)
There are four outlets and two inlets.

Figure 1.23 Power distribution unit (AC200-240V, 1U, Max 2 enclosures connection)

ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-
Drive interface Storage media
Hard disk
Serial Attached Hard disk
SCSI (6Gbit/s)
Flash memory
Inlets (INPUT)
24
Copyright 2013 FUJITSU LIMITED
Storage capacity
300GB, 450GB, 600GB
1TB, 2TB, 3TB, 4TB
100GB, 200GB, 400GB,
800GB
Outlets (OUTPUT)
Speed
15,000rpm
7,200rpm
–
P3AM-4822-12ENZ0