Mac Filter; Chapter 11 Mac Filter; Overview; What You Need To Know - ZyXEL Communications LTE6100 User Manual

11.1 Overview

This chapter discusses MAC address filtering.
You can configure the LTE Device to permit access to clients based on their MAC addresses in the
MAC Filter screen. This applies to wired and wireless connections.

11.1.1 What You Need to Know

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen.

11.2 The MAC Filter Screen

Use the MAC Filter screen to allow wireless and LAN clients access to the LTE Device. To change
your LTE Device's MAC filter settings, click Security > MAC Filter. The screen appears as shown.
Figure 44 Security > MAC Filter
LTE6100 User's Guide
C
HAPTER
11

MAC Filter

79