Table of Contents
Advertisement
5.2 The LAN Setup Screen
Click Network Setting > Home Networking to open the LAN Setup screen. Use this screen to
set the Local Area Network IP address and subnet mask of your LTE Device and configure the DNS
server information that the LTE Device sends to the DHCP client devices on the LAN.
Figure 17 Network Setting > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 9 Network Setting > Home Networking > LAN Setup
LABEL
LAN IP Setup
IP Address
IP Subnet Mask
DHCP Server State
DHCP
IP Addressing Values
IP Pool Starting
Address
Pool Size
DNS Values
LTE6100 User's Guide
DESCRIPTION
Enter the LAN IP address you want to assign to your LTE Device in dotted decimal notation,
for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your LTE Device automatically computes the subnet mask
based on the IP address you enter, so do not change this field unless you are instructed to
do so.
Select Enable to have your LTE Device assign IP addresses, an IP default gateway and DNS
servers to LAN computers and other devices that are DHCP clients.
If you select Disable, you need to manually configure the IP addresses of the computers
and other devices on your LAN.
When DHCP is used, the following fields need to be set.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
Chapter 5 Home Networking
41
Advertisement
Table of Contents
