Before You Begin; The Broadband Screen; Edit Internet Connection - ZyXEL Communications LTE6100 User Manual

Chapter 4 Broadband
If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and
DNS server IP address(es).
APN
Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for
LTE stations to enter the LTE network and then the Internet.

4.1.3 Before You Begin

You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM
card's PIN code if the INTERNET light on your LTE Device is off. Get this information from your
service provider.

4.2 The Broadband Screen

The LTE Device must have a WAN interface to allow users to use the LTE connection to access the
Internet. Use the Broadband screen to view or modify a WAN interface.
Click Network Setting > Broadband. The following screen opens.
Figure 13 Network Setting > Broadband
The following table describes the fields in this screen.
Table 4 Network Setting > Broadband
LABEL
Internet Setup
Name
APN
IPv6/IPv4 Mode
NAT
Modify

4.2.1 Edit Internet Connection

Use this screen to configure a WAN connection.
32
DESCRIPTION
This is the service name of the connection.
This is the name of the LTE network to which the LTE Device will connect.
This shows whether the connection uses IPv6 or IPv4.
This shows whether NAT is activated or not for this connection. NAT is not available
when the connection uses the bridging service.
Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the Device. A window displays
asking you to confirm that you want to delete the connection.
LTE6100 User's Guide